Philips CCB 134AT Owner's Manual page 49

5
Press the PLAY/ button or the STOP/
Movie Ratings or Parental Guidelines. Then, press the
F.FWD/B button.
BLOCK
> Movie Ratings
Parental Guidelines
SELECT KL CHOOSE B
TO END PRESS EXIT
6
Press the PLAY/ button or the STOP/
the rating you want to block. Then, press the F.FWD/B
button so that ON appears beside the rating.
For example, if you set PG to ON, you may not view PG pro-
gramming because the block is on. Programs with a PG or higher
rating will be blocked. A "CHANNEL XX BLOCKED..." message
will appear when someone tries to access such programming.
MOVIE RATINGS
> G [OFF]
PG [OFF]
PG-13 [OFF]
R [OFF]
NC-17 [OFF]
X [OFF]
SELECT KL CHOOSE B
TO END PRESS EXIT
More specific sub-ratings are available for TV-Y7, TV-PG, TV-14,
and TV-MA. (See example below.) When you press the
F.FWD/B button to turn on TV-Y7, TV-PG, TV-14 or TV-MA,
additional sub-ratings will appear.
If you select the rating category, such as TV-PG, and turn it on
or off, the specific sub-ratings, such as V for violence, will turn
on or off automatically. You can always turn specific sub-ratings
on or off by selecting them individually. However, you may only
set a sub-rating to ON if the rating category is set to ON.
Ratings are defined on page 51.
Example
of specific
sub-ratings
TV-PG
TV-PG [OFF]
>
D [OFF]
L [OFF]
S [OFF]
V [OFF]
SELECT KL CHOOSE B
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
button to select
button to select
PARENTAL GUIDELINES
TV-Y [OFF]
>
TV-Y7
>
- - - - - - - - - - - - - - - -
TV-G [OFF]
TV-PG >
TV-14 >
TV-MA >
SELECT KL CHOOSE B
TO END PRESS EXIT
SmartLock (cont'd) 49
5-6
POWER EJECT
SLEEP/WAKE UP SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
FM SURF
VOL.
CABLE/DBS COMBI
VCR PLUS+
/ENTER
VAR.SLOW MUTE
TRACKING F.ADV SLOW
SMART SKIP INDEX
SEARCH SEARCH
PICTURE SOUND
Helpful Hints
• If the "CHANNEL XX BLOCKED..."
or "PLAYBACK BLOCKED..." message
appears and you want to view this
programming, enter your access code.
The channel/tape will remain blocked
until you enter the correct code.
If you do not know the code, you
must select another channel using the
CH(annel) o/p buttons or press the
STOP/p button to stop tape play-
back.
• Ratings will remain blocked even after
a power failure.
• You cannot access the menu when
the "CHANNEL XX BLOCKED..." or
"PLAYBACK BLOCKED..." message
appears.
7