Advertisement
Dear music lover,
thank you for purchasing a PRO·JEO AUDIO Head Box.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
'V
Warning of a hazard for the user, the unit or possible misuse.
~
Important notice.
Connection to the amplifier
Connect the RCNPhono sockets marked Out on the Head Box to the RCNPhono sockets marked Tape In
on your amplifier, and the Tape Out sockets on your amplifier to Ihe In sockels on Ihe Head Box.
Take care
10
connect the left and right channels correclly. The righl channel is usually marked red, the left
channel black or white.
Connecting the headphones
Connect Ihe headphones to the
,~.,
(6,3mm 0) jack sockel on Ihe fronl of the Head Box. Use the control knob
10
adjusllhe level
10
Ihe required volume.
'V
Please turn the volume level to minimum before conneding the headphone.
Minimum impedance of the head phone 300hms.
Headphone replay
Use Ihe inpul selector of Ihe amplifier
10
choose the source you wish
10
hear. You may also have
10
engage
Ihe Tape Monitor button, depending on how your amplifier switches sources
10
lope.
Mains power connection
The Speed Box is supplied wilh a power supply suitable for your country's mains supply. Check the label
before connecting
10
ensure compliance wilh the mains rating in your house. Connect the low voltage plug
from Ihe power supply to the
Power
-16V socket before connecting the power supply to the mains.
2
©
Audio Trade GmbH· Pro·Jed Head Box II . Revision 6.3.06/1.5.06
Advertisement
