Troubleshooting; Operation Status - MUTOH PJ-1614NXE Maintenance Manual

9 Troubleshooting

9.2.1 Operation Status

This section describes the message contents, check items, and corrective actions for normal operation.
No. Message
1 Cover open
2 Set paper
Downloaded From ManualsPrinter.com Manuals
Table 9-2 Events and Check Items for Operation Status Messages
Event/
symptom
Front cover is (1) Is cover sensor assembly
open. loose?
Maintenance
cover is open.
Lever is up. (2) Does cover sensor
assembly turns ON/OFF
correctly as front cover
opens and closes?
(3) Is cover sensor assembly
cable connected securely?
(4) Is transmission type
photo sensor fitted
correctly?
(5) Is transmission type
photo sensor face
contaminated?
PJ-1614NXE PJ-2216NXE Maintenance Manual
Check item
ÅETighten cover sensor
assembly screws.
ÅEAdjust cover sensor
assembly height.
ÅECorrectly connect cover
sensor assembly cables to
MAIN board assembly
connectors J128, J129 and
J130.
ÅEInstall transmission type
photo sensor correctly.
ÅEClean sensor face using a
swab.
9-2
Action Reference
4.5.8
Replacing Cover
R Sensor
Assembly and
Cover L Sensor
Assembly
7.8 Cover
Sensor
Adjustment
4.3.2Replac
ing MAIN Board
Assembly,
DIMM,
MOTHER Board
Assembly,
HDD_MOTHER
Board Assembly
4.4.6
Replacing
Transmission
Type Photo
Sensor
4.4.6
Replacing
Transmission
Type Photo
Sensor