InFocus LiteBoard IN3902LB User Manual page 18

NOTE: If the pen's motion is too sensitive, press the M button on the pen to
change motion stabilization (see
information).
6
When you're done, set the pen aside and make sure it isn't pointing at
the screen; it will turn itself off automatically after 30 minutes.
If you have problems, see Troubleshooting (below).
Pen Position and Avoiding Shadows
Your Location Distance from the Screen
You can use the LiteBoard pen right up against the screen, or from across
the room. You might find that your pointing accuracy will improve if you
get closer to the screen and avoid standing too far off to one side or the
other of the screen.
Avoid Shadows!
The pen won't work if its tip is in a shadow or if it is pointing at a shadow:
Correct (no shadow)
How to Hold the Pen
You can hold the pen the way you would hold a normal pencil or pen, or
you can hold it like a remote control - use in whichever position is most
comfortable. NOTE: If the pen is up close to the screen, you can press its tip
against the screen's surface to click and drag.
LiteBoard Pen Menu
below for more
Incorrect (shadow)
Using More than One Pen
The projector can work with more than one pen, but you can only use one
pen at a time. When you want to switch to a different pen:
1
Point the current pen away from the projected image for at least 3 sec-
onds.
2
Press the tip, L, or R button on the new pen to turn it on, and then start
using the new pen.
NOTE: Settings in the projector's LiteBoard Pen menu (see below) apply to
all pens used with that projector.
Pen Features
Buttons and Pen Tip
The pen's three top buttons are equivalent to the left (labeled 'L'), right
(labeled 'R'), and middle (labeled 'M') buttons on a mouse. The pen's tip is
17