Logitech IO2 User Manual page 10

™
Logitech® io Digital Pen with Bluetooth®
2
Serial Port Profile
A Bluetooth serial port named, "ANOTO OBEX," can be used to transfer digital files, if push via the standard Object
Push Profile is not possible or desired.
Bluetooth profiles, associated with the digital pen, are intrinsically linked with Anoto communication protocol
implementations. Please visit www.anoto.com for more information.
Bluetooth® Pairing
The digital pen supports both initiating and responding to pairing requests from compatible Bluetooth devices.
Initiating pairing from the digital pen occurs when you "tick" the Anoto pairing magic box. There are different pairing
boxes for PCs and mobile devices.
The digital pen can also respond to a pairing request from a Bluetooth enabled device. The pairing respond state starts
when the cap is removed. During this state, the digital pen is in discoverable, connectable, and pairable mode. Once
started, the digital pen will remain in this state for a limited time of two minutes.
Pairing can be enabled/disabled by setting the pen's Discoverable Mode in the Bluetooth Digital Pen Configuration
Utility.
Multiple-device Pairing
The digital pen can be paired against one mobile device and one PC at the same time. If the pen is successfully paired
against a PC, any previous pairing against a PC is removed. In the same way, if the pen is successfully paired with a
mobile device, any previous mobile device pairing will be removed.
Bluetooth® Passkey
A Bluetooth Passkey is used when you need to pair the digital pen with another device (e.g., a mobile phone/PDA or
PC). A four-digit passkey is provided on the Logitech Pen Identification card that comes with your Logitech io Digital
2
Pen with Bluetooth.
Page - 7