Table of Contents
Advertisement
7.
PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
'VPS' (Video Programming System) and
'PDC' (Programme Delivery Control)
With 'VPS and PDC', the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme's start time (for example, 20.15 and VPS 20.14),
you must enter '20.14' as the start time.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording (with 'VIDEOplus')
All the information required for a programming is contained in
the PlusCode-programming number.
a
Press the
TIMER s
button on the remote control.
b
Select the line '
Videoplus
A
and confirm with the
' with the buttons
or
B
C
button.
c
Enter the entire PlusCode-programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode-programming number.
If you make a mistake, you can clear your instructions
with the
button.
CLEAR
VIDEOPLUS
CODE
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1 2 3 4 5 6( ( (
0-9
d
In line '
' select daily or weekly programming
REPEAT
with the
B
or
A
button.
'
': If you want to make a recording every day
Mo-Fr
from Monday to Friday.
'
': If you want to make a recording every day
Mo-Su
from Monday to Sunday.
'
': If you want to make a recording every week
WEEKLY
on the same day of the week.
'
': If you want to make only one recording.
ONCE
e
Confirm with the
button. Your programming details
OK
will then appear on the TV screen.
TIMER PROGRAMMING
DATE PROG. START
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15
xxx
15:36 15:50 -
ã Exit:
« press TIMER
D If VIDEOPlus+ does not recognise the TV channel,
'
' will appear on the TV screen. Instead of
P??
'
', you can select the programme number you
P??
want with the number buttons
D If '
Code error
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the
TIMER s
REPEAT
ONCE
Store:
press OK
VPS
END LP PDC REP.
*
ONCE
Start:
press è
.
0-9
' appears on the TV screen, this
button.
15
Advertisement
Table of Contents
