Table of Contents
Advertisement
5.
PLAYBACK FUNCTIONS
Playing a cassette
a
Put a cassette into the cassette slot.
b
Press the
PLAY G
button.
c
If you press the
STOP h
Combi will switch to pause. To stop, press the
button again.
d
To eject the cassette, press the
TV-VIDEO Combi or press the
remote control several seconds.
D Some hired cassettes may have a poor picture or
poor sound quality. This is not a fault in your
machine. Please read `Picture interference´.
D Some functions switch off automatically after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
Playing NTSC cassettes
With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
D Some special features (for example, still picture) are not
possible while you are playing an NTSC cassette.
Tape position indication
D Press the
button to display the current tape position.
OK
D To change the type of tape position display, proceed as
follows:
a
During playback, press the
b
Select the line '
' with the
Tape
confirm with the
C
button.
c
Select the line '
Tape counter
button.
A
d
With the
D
or
C
button select '
time used, or '
' to check the time left on the tape.
LEFT
e
Confirm with the
button.
OK
button once, the TV-VIDEO
STOP h
?
button on the
STOP h
button on the
button.
MENU
B
or
A
button and
' with the
B
or
' to check the
USED
Searching for tape position with the picture
(picture search)
a
While a cassette is playing, press the
I
(forward) button once or several times.
b
To stop at a certain picture, press the
D During picture search, the picture quality may not be
so good and there will be no sound.
Still picture
a
Press the
STILL R
button. A still picture will appear on
the screen.
b
Each time you press
STILL R
move on one step.
Searching for tape position without the
picture (wind and rewind)
a
Stop the tape with the
b
Press the
H
(reverse) or
c
To stop at a certain picture, press the
Instant View
With this function you can switch to picture search during
wind and rewind.
a
If you hold the
H
(rewind) or
during wind or rewind, you will switch to picture search.
b
When you release the button, the TV-VIDEO Combi will
automatically switch back to rewind or wind.
Automatic search for a tape position (index
search)
At the start of each recording, the TV-VIDEO Combi will write
an index code on the tape.
a
Press the
button. Press the
INDEX E
select the next code mark or the
previous code mark.
b
When the TV-VIDEO Combi finds the code mark, it will
automatically switch to play.
(reverse) or
H
PLAY G
button.
again, the picture will
button.
STOP h
I
(forward) button.
STOP h
button.
I
(wind) button
button to
I
H
button for the
11
Advertisement
Table of Contents
