Disconnecting The Current Call And Switching To The Second Call; Listening To Music - scala rider Rider Freecom 1 Manual

5.1.6 DISCONNECTING THE CURRENT CALL AND SWITCHING TO THE SECOND CALL

To disconnect the current call and switch to the call on the second phone when two mobile phones are paired to your unit, through
the unit buttons:
Tap .
●

5.1.7 LISTENING TO MUSIC

To start music streaming from your paired device, do one of the following:
To use the unit buttons: tap
●
To use the SmartSet app: tap MUSIC.
●
To stop music streaming, do one of the following:
To use the unit buttons: press
●
To use the SmartSet app: on the MUSIC screen, tap
●
To skip to the next track (while streaming music), do one of the following:
To use the unit buttons: tap
●
To use the SmartSet app: on the MUSIC screen, tap
●
To skip to the previous track (while streaming music), do one of the following:
To use the unit buttons: tap
●
To use the SmartSet app: on the MUSIC screen, tap
●
To forward auto scan tracks (while streaming music) and then play your desired track, do one of the following:
To use the unit buttons:
●
a. Tap and . Forward scan plays a few seconds of each track.
b. When you hear a track that you want to play, tap
To use the SmartSet app:
●
a. On the MUSIC screen, under MUSIC SCAN, tap
b. When you hear a track that you want to play, on the MUSIC screen, under MUSIC SCAN, tap
c. When you hear a track that you want to play, tap
To backward auto scan tracks (while streaming music) and then play your desired track:
To use the SmartSet app:
●
a. On the MUSIC screen, under MUSIC SCAN, tap
b. When you hear a track that you want to play, on the MUSIC screen, under MUSIC SCAN, tap
5.1.7.1 SWITCHING MUSIC SOURCES
If two music (A2DP) audio sources are paired, FREECOM 1 uses the audio source from which you last played music.
.
for 2 seconds.
.
.
.
twice.
.
or use VOX.
. Forward scan plays a few seconds of each track.
or use VOX.
. Backward scan plays a few seconds of each track.
16
.
.