Hardware Overview Model Xs716T; Front Panel Model Xs716T - NETGEAR XS708T Hardware Installation Manual

8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch
Table 2. LEDs on switch
LED Description
Power LED
•
•
•
Fan LED
•
•
Speed and ACT
LEDs for copper
•
ports 1 to 12
•
•
•
•
Speed and ACT 10G LED:
LEDs for SFP+
slots 11F and 12F
•
•
•
1G LED
•
•
•

Hardware Overview Model XS716T

The following sections describe the physical characteristics of model XS716T.

Front Panel Model XS716T

The switch provides sixteen 100M/1G/10G copper RJ-45 ports, of which port 15 and slot 15F form one
combo port and port 16 and slot 16F form another combo port. The 1G and 10G SFP+ slots (15F and 16F)
Solid green. The device is powered on.
Solid yellow. The device is booting.
Off. Power is not supplied to the device.
Solid yellow. The fans have failed.
Off. The fan is operating normally.
Off: No link is established.
Solid green: A valid 1000 Mbps link is established.
Blinking green. The port is transmitting or receiving
packets at 1000 Mbps.
Solid yellow. A valid 10 or 100 Mbps link is established.
Blinking yellow. The port is transmitting or receiving
packets at 10 or 100 Mbps.
Off: No SFP+ module link is established.
Solid. A valid 10 Gbps link is established.
Blinking. The SFP fiber port is transmitting or receiving
packets at 10 Gbps.
Off. No SFP+ module link is established.
Solid. A valid 1 Gbps link is established.
Blinking. The module is transmitting or receiving packets
at 1 Gbps.
Hardware Overview
15