Hardware Overview Model Xs708T; Front Panel Model Xs708T; Back Panel Model Xs708T - NETGEAR XS708T Hardware Installation Manual

8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch

Hardware Overview Model XS708T

The following sections describe the physical characteristics of model XS708T.

Front Panel Model XS708T

The switch provides eight 100M/1G/10G copper RJ-45 ports, of which port 7T and slot 7F form one combo
port and port 8T and slot 8F form another combo port. The 1G and 10G SFP+ slots (7F and 8F) accept
copper or fiber modules. You use either port 7T or port 7F, and similarly, either port 8T or port 8F. Each
copper RJ-45 port is capable of sensing the line speed and negotiating the duplex mode with the link partner
automatically.
The following figure shows the front panel of the model XS708T.
Figure 1. Front panel model XS708T
Number
1
2
3
4
5
6
7

Back Panel Model XS708T

The following figure shows the back panel of model XS708T.
Description
Power and Fan LEDs.
Recessed Reset button to restart the device.
Recessed Factory Defaults button to restore the device back to the factory defaults.
Eight RJ-45 connectors for 100M/1G/10G AutoSensing 10-Gigabit Ethernet switching
ports.
Two of these ports (7 and 8) are combo ports: You can either use ports 7T and 8T
as Gigabit Ethernet switching ports or you can install copper or fiber modules in 1G
or 10G SFP+ slots 7F and 8F.
Speed and activity (ACT) LEDs for each port.
One USB 2.0 port for firmware uploads or configuration settings file uploads and
downloads (backup) using a USB storage device (supports FAT32 and VFAT file
systems only).
Hardware Overview
11