Hardware Overview Model Xs712Tv2; Front Panel Model Xs712Tv2 - NETGEAR XS708T Hardware Installation Manual

8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch
Table 1. LEDs on model XS708T switch (Continued)
LED Description
Speed and ACT 10G LED:
LEDs for SFP+
slots 7F and 8F
•
•
•
1G LED
•
•
•

Hardware Overview Model XS712Tv2

The following sections describe the physical characteristics of model XS712Tv2.

Front Panel Model XS712Tv2

The switch provides twelve 100M/1G/10G copper RJ-45 ports, of which port 11T and slot 11F form one
combo port and port 12T and slot 12F form another combo port. The 1G and 10G SFP+ slots (11F and 12F)
accept copper or fiber modules. You use either port 11T or port 11F, and similarly, either port 12T or port
12F. Each copper RJ-45 port is capable of sensing the line speed and negotiating the duplex mode with the
link partner automatically.
The following figure shows the front panel of the model XS712Tv2.
Figure 3. Front panel model XS712Tv2
Number
1
2
3
Off: No SFP+ module link is established.
Solid. A valid 10 Gbps link is established.
Blinking. The SFP fiber port is transmitting or receiving
packets at 10 Gbps.
Off. No SFP+ module link is established.
Solid. A valid 1 Gbps link is established.
Blinking. The module is transmitting or receiving packets
at 1 Gbps.
Description
Power and Fan LEDs.
Recessed Reset button to restart the device.
Recessed Factory Defaults button to restore the device back to the factory defaults.
Hardware Overview
13