LG -600 Series Repair Manual page 8

2. TEST SETUP
A. Computer
1. Put GPIB card to the extended slot of personal computer.
If you have a notebook PC, you need PCMCIA card for GPIB.
2. Connect the RS-232 cable between COM port of your PC and MON port or
UART port of PIF.
MON Port : Download, CAL Test (????)
UART : Auto Test or Handsfree_Set (????)
B. GSM TEST_SET(8960)
1. Connect GPIB cables (from Computer and Power Supply) to the rear panel
of 8960.
2. Connect mobile RF cable to RF In/Out port at the front panel of 8960.
C. Power Supply
1. Setup : Voltage 4.0V, max Current 3A.
2. Connect GPIB cable at the rear panel.
3. Connect power cable
GSM Handsets Lab.
8