Dryer Description; Start And Programmes; Choosing A Programme - Indesit IS41V Instruction Booklet

Dryer Description

The features
Heat switch
Filter assembly
(on inside of the door)
Heat selection
Select the relevant heat setting :
To select high heat the Heat Selection button
must be IN .
To select Low heat the Heat Selection button
must be OUT .
The choice of HIGH HEAT or LOW HEAT depends
upon the fabric you wish to dry (see Laundry).
Door release
To open door, grip handle and pull towards you.
If the door is opened while the dryer is in use, the
drying programme cuts out automatically and the

Start and Programmes

Choosing a programme

1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type (see
Laundry).
3. Open the door and make sure the filter is clean
and in place (see Maintenance).
4. Load the machine and make sure items are not in
the way of the door seal. Close the door.
5. Choose a drying time by checking the Drying Times
guide (see Laundry).
- Select the required temperature with the heat
button.
- Select a drying time by rotating the TIMER knob
clockwise.
Timer knob
Door release
machine stops. When the door is closed the dryer will
restart but you will not need to reset the timer control.
You can however reset the Timer Control at any stage
should you wish.
The TIMER knob sets the drying time: rotate it
clockwise, never counter-clockwise, until the
indicator is pointing to the drying time you want to
select (see Start and Programmes).
To turn Off the dryer: turn this knob until the '0' is in
line with the indicator.
6. About 10 minutes before the programme is
completed, the heating elements will be switched
off, and the programme enters the final 'Cool
Tumble' phase. During this phase, the fabric is
cooled. You should always allow the dryer to
complete this phase.
7. Open the door, take the laundry out, clean the filter
and replace it (see Maintenance).
8. Unplug the dryer.
GB
7