Recycling The Clippings; Bagging The Clippings; Side-Discharging The Clippings - Toro 20377 Operator's Manual

Recycling the Clippings

Your machine comes from the factory ready to recycle the
grass and leaf clippings back into the lawn.
If the grass bag is on the machine, remove it; refer to
Removing the Grass Bag (page
chute is on the machine, remove it; refer to
Side-Discharge Chute (page

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf
clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer
to Removing the Grass Bag (page
Installing the Grass Bag
1. Raise and hold up the rear door
1. Notches
2. Rear door
2. Install the grass bag, ensuring that the pins on the bag
rest in the notches on the handle
3. Lower the rear door.
Removing the Grass Bag
To remove the bag, reverse the steps above.
11). If the side-discharge
Removing the
12).
11).
(Figure 20).
Figure 20
3. Grass bag pin (2)
(Figure 20).
Side-Discharging the
Clippings
Use side discharging for cutting very tall grass.
If the grass bag is on the machine, remove it; refer to
Removing the Grass Bag (page
Installing the Side-Discharge Chute
Lift up the side door and install the side-discharge chute
(Figure 21).
g189796
11
11).
Figure 21
g009537