Title Menu; Disc Menu; Camera Angle; Changing The Audio Language - Zenith XBV243 Installation And Operating Manual

Operation with DVD and Audio CD (Cont'd)
Special DVD Features (Cont'd)
Checking the contents of DVD Video
discs: Menus
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use the b/B/v/V buttons to highlight your
selection, then press SELECT/ENTER.

Title Menu

DVD
1 Press TITLE.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TITLE again.

Disc Menu

DVD
1 Press DISC MENU.
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU again.

Camera Angle

DVD
If the disc contains sequences recorded from different
camera angles, the angle icon blinks on the display. You
can then change the camera angle if you wish.
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Subtitles
DVD 1 ENG
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Note
If appears, the feature is not available on the disc.
Programmed Playback with
Audio CD
Program allows you to store your favorite tracks for a
particular disc in the DVD+VCR memory.
Program can contain 20 tracks.
1 1
2 2
Press PROGRAM to exit the Program menu.
3 3
4 4
1
5 5
6 6
Clearing the program
To clear the programmed tracks one by one
Press 1 1 2 2 3 3 4 4 to select the unwanted number and
then press CLEAR.
To clear all the programmed tracks
Press 1 1 2 2 3 3 4 4 to select "Clear All" and then press
SELECT/ENTER. Press PLAY or SELECT/ENTER to
exit the screen. If you press PROGRAM to exit the
screen, the programs are not cleared. (The programs
are also cleared when the power is turned off or the
disc is removed.)
Insert an audio CD and close the tray.
Press PROGRAM during playback or in the stop
mode.
The Program menu appears.
Program
Note
Press the number buttons to select the desired
track number.
Press 2 2 and the number buttons to select the
next track number.
Repeat step 4 to place additional tracks on the
Program list.
Press PLAY or SELECT/ENTER to start play-
back.
Playback begins in the order in which you programmed
the tracks and "PROG." appears on display window.
Playback stops after all of the tracks on the Program
menu have played once.
Step 1
Total Time 00:00
Clear All
31