NETGEAR PR2000 Installation Manual page 9

4. Turn on power to the personal router by moving the Internet Mode
switch from the Power Off position to the Wired position.
5. Open a web browser on your computer, type www.routerlogin.net
in the address field, and press the Enter key.
If a login screen displays, enter admin for your user name and
password for your password. Then click the OK button.
The Setup Wizard screen displays.
6. Click the Next button and follow the prompts of the Setup Wizard.
When you are done, the Congratulations screen displays.
The personal router is connected to the Internet.
7. (Optional) Connect your wireless devices to the personal router.
For more information, see
on page 18.
8. (Optional) Connect a USB device to the USB port of the personal
router.
A USB device can be a USB storage drive or a USB printer.
When plugged into the wall, the USB port can also be used as a
cell phone charger. See the user manual.
Connect WiFi Devices to Your Network
9