Table of Contents
Advertisement
•
10 bit 4:2:2 component digital video and key processing.
•
4:3 and anamorphic 16:9 switchable aspect ratio where applicable.
•
Contract Ross Video for additional format compatibility.
Video Inputs
Number of Inputs
Equalization (using Belden 1694 cable)
Impedance
Video Inputs, SDI
•
Inputs can be used for either key or video.
•
The reference input is selectable, analog black for Standard Definition operation, and the recommended tri-level sync for High Definition operation.
Video Outputs
Number of Outputs
Return Loss
Rise and Fall Time
Signal Level
DC Offset
Overshoot
•
All video outputs are 10-bit SMPTE-259M-C (SD Mode) or 10-bit SMPTE-292M serial digital (HD Mode).
•
EDH is inserted into all outputs and can be disabled. Aux Bus outputs do not have EDH insertion, but do pass previously inserted EDH. (SD
Video Mode).
•
Line CRCs are inserted into all outputs and can be disabled. Aux Bus outputs do not have line CRCs inserted, but do pass previously inserted
line CRCs. (HD Video Mode).
Jitter
HD - Tri-Level Sync
HD - Composite Reference
SD - Tri-Level Sync
SD - Composite Reference
System Timing
•
All video inputs zero time relative to reference input, auto timing will correct for inputs out of time by up to +/- 0.25 line.
•
System delay is less than 1 line.
System Reference
Reference Format
480i/59.94
22 • Specifications — Carbonite eXtreme Configuration Guide (v9.0)
All Switchers
144 SDI (24 to Switcher Sub-System)
> 100m @ 1.5Gb/s
> 300m @ 270Mb/s (5°-40°C)
75 ohm, terminating
SMPTE 259M/292M serial digital (non-looping)
144 SDI (10 from Switcher Sub-System)
> 16dB @ 1.5GHz
800ps +/- 10% (SD)
240ps +/- 10% (HD)
800mV +/- 10%
0V
< 8%
Alignment (> 100KHz) < 0.2UI
Timing (<10Hz) < 1.0UI
Performance not guaranteed with composite reference
Alignment (> 1KHz) < 0.2UI
Timing (<10Hz) < 0.2UI
Alignment (> 1KHz) < 0.2UI
Timing (<10Hz) < 0.5UI
Video Format
480i/59.94, 480i 16:9/59.94, 720p/59.94, 1080i/59.94, 1080pSF/29.97,
1080p/29.97, 1080p/59.94 (A)
Advertisement
Table of Contents
