Onsite Commissioning
CARBONITE-COM-1DAY
Extended Warranty
On-site Commissioning is a great way to ensure that your switcher is properly installed
into your facility and tuned to maximum performance.
Once the customer has installed and cabled the equipment, a Ross Commissioning expert
will come on site to get the switcher configured, verify that all peripheral interfaces are
operating properly, provide a basic technical orientation, and help you get on the air.
Training is provided on the customer's equipment at their site. Expenses are extra, and
billed at the completion of the visit. Ross Video cannot guarantee the availability of a local
Trainer, as such, travel costs to all locations will be invoiced at cost. Two (2) days, or more,
of training is recommended for multiple MLE systems. Four (4) weeks advanced scheduling
notice is required. Additional days of training can be added with the
CARBONITE-COM-1DAY option. Please quote one additional option for each additional
day of training required.
Customers cancellation or rescheduling of on-site services without seven (7) calendar days
advanced notice will incur full invoice.
Please note that commissioning does not replace operator or technical training. Contact
your Ross representative to discuss which types of assistance are best suited to your needs.
This extends the standard one-year warranty on your control panel by one year. Additional
years can be purchased if required.
•
C2-999 — C2 control panel
•
C2M-999 — C2M control panel
•
C2S-999 — C2S control panel
•
C2X-999 — C2X control panel
•
C3S-999 — C3S control panel
•
C3X-999 — C3X control panel
Carbonite eXtreme Configuration Guide (v9.0) — System Options • 19