System Options - Carbonite eXtreme Configuration Manual

System Options

Options are typically ordered when the switcher is purchased. However, you can order options if your needs change in the
future. Most of our options can be easily installed in the field. You can take comfort in knowing that you can purchase
options in the future and that installation at your site will be a smooth process.
XPression Live CG
XDS0-0001-CPS
Redundant Power
Cxx-PANEL-REDPSU-EXT
CF-NK-P3G
Analog I/O Pack for SD Signals
CPS-ANALOGIO1
16 • System Options — Carbonite eXtreme Configuration Guide (v9.0)
Note: The XDS0-0001-CPS option must be purchased at the same time as your
switcher. Only one XDS0-0001-CPS option can be purchased per switcher. If you
require additional licences, use the XDS0-0001 option.
Seamlessly combine the creative power of the Ross Video XPression Designer software
with the ease of use of your Ross Switcher. Create stunning still graphics using XPression
Designer, and transfer them directly to an Animation-Store channel on the switcher using
the RossLinq interface. Up to two (2) channels with dedicated alpha can be controlled from
the XPression Software Client. This feature supports still images only.
The XPression Designer requires a computer with a Microsoft
®
7 (32/64 But) operating system and an NVIDIA
The redundant power supply options provides protection against AC power failure. It
allows two external power supplies to receive power from independent power sources.
Complete failure of one source, or power supply, will not affect the operation of the switcher
in the slightest. If the main AC power fails, the switcher instantly draws power from the
remaining source. The transition from one power source to the other is totally transparent
and has no effect on the output of the switcher; a critical feature should one power source
fail during an on-air broadcast.
A redundant power supply can be ordered for the control
panel(Cxx-PANEL-REDPSU-EXT) or the frame(CF-FRAME-REDPSU-EXT).
When selecting the option you want, replace the xx with the size of your control panel. For
example, C2X-PANEL -REDPSU-EXT is the option code to add redundant power for
the C2X.
Note: This option must be purchased at the same time as your switcher.
This option provides input and output support for analog video formats, such as RGB/YPbPr
or YC/CVBS. A single (1) Ross GearLite DAC-9013 SDI to Analog Composite/Component
Video Converter is provided for analog Program Out, and four (4) Ross GearLite ADC-9033
Analog Composite/ Component/YC to ADI Video Converter for analog Inputs.
® ®
Windows XP
®
graphics card.
or Windows