Table of Contents
Advertisement
events. A small arrow at the top or bottom of the event list indicates that there
are additional events.
Once you have highlighted the event you wish to set or edit, press SELECT. You
will be prompted with a pop-up menu. If you choose the scheduling option, the
digital satellite receiver will turn on (if necessary) and tune to the specified
channel at the correct date and time. If the Schedule to Tape option is provided
and is chosen, and you have successfully completed the VCR setup procedure,
the digital satellite receiver will allow recording of the event. To remove a
previously scheduled event, select the Delete option. If you inadvertently
pressed
, select Cancel.
After choosing a scheduling option, a pop-up panel appears for channel
selection. You can enter the desired channel using either the number buttons on
the remote control or the
and
or
and
.
After specifying a channel, press the
button or select OK when you are
ready to continue.
Next, enter a Start time using either the number buttons on the remote control or
the
and
buttons. Press to continue.
You then must specify whether the time you entered is AM or PM (or N for
noon, or M for midnight if the time specified is 12:00) using the
and
buttons. To continue, press .
Using the same procedure as setting the start time, set the program Duration as
hours and minutes. As before, use to advance to the Frequency column.
The Frequency column is very versatile. Using the
and
buttons, you can
specify when, or how often, the event occurs. Your choices are: Today,
Tomorrow, Every Mon, Every Tue, Every Wed, Every Thu, Every Fri, Every Sat,
Every Sun, Everyday, Mon-Fri, or "/" to specify an exact date. If you are
specifying a date, enter the numbers using the remote control in month/day
format. The year will be set automatically. Events can be scheduled up to eleven
27
Using the menus - Draft A.03
Advertisement
Table of Contents
