Advertisement
Adding an Active Subwoofer
Adding a subwoofer to extend the low fre-
quency response of your monitor system
can be beneficial when mixing your music.
Typically, it is best to set the subwoofer level
to be equal to that of the main speakers.
Because deep-bass frequencies are non-di-
rectional, it is difficult for our ears to
locate the sound source, and the precise
placement of the subwoofer is not as critical
as the main speakers. The ideal location
is between the two main speakers. If you
notice there are frequencies that sound qui-
eter than others, move the subwoofer slightly
to the left or right.
To add a powered subwoofer to your MediaOne M30 speakers to create a 2.1 system:
•
Connect your audio source to the left and right RCA Inputs of the MediaOne M30.
•
Connect the MediaOne M30 1/8" STEREO / SUB Output to the left and right line
inputs of your active subwoofer.
•
Play music from your audio source.
•
Turn up your MediaOne M30 to your desired listening level.
•
Turn up the level of the subwoofer to desired level.
Note: The MediaOne M30 front panel Volume control will control the level of the entire system.
From Audio Source
MediaOne M30
SUBWOOFER
7
Advertisement
