Page 1
20000003928b EUROSTAR_092016 EUROSTAR 20 digital ® EUROSTAR 40 digital ® EUROSTAR 60 digital ® EUROSTAR 100 digital ® EUROSTAR 20 high speed digital ® Operating instructions...
Securing Switching on the instrument Maintenance and cleaning Error codes Warranty Accessories Permitted IKA ® stirrer tools Technical data Declaration of conformity We declare under our sole responsibility that this product corresponds to the regulations 2014/35/EU, 2006/42/EC, 2014/30/EU and 2011/65/EU and conforms with the standards or standardized documents: EN 61010-1, EN 61010-1-2-051, EN 61326- 1, EN 60529 and EN ISO 12100.
Safety instructions • Process pathogenic materials only in closed vessels • Read the operating instructions in full before under a suitable fume hood. Please contact IKA starting up and follow the safety instructions. ® application support if you have any question.
Page 5
The operation of a free rotat- • It is important to note that the surfaces of the DANGER motor (cooling fins) and certain parts of the ing shaft end is dangerous. bearing may get very hot during operation. Therefore, for safety rea- •...
Correct use • Use This instrument is suitable for use in all areas except: For mixing/stirring liquids with low to high vis- - Residential areas cosities by various stirring tools. - Areas that are connected directly to a low-voltage supply network that also supplies residential areas. Intended use: Stand device (chuck points down) The safety of the user cannot be guaranteed: •...
EUROSTAR 20/40/60/100 digital EUROSTAR 20 high speed digital The clamping chuck and output shaft permit clamp- The output shaft has cone seat specially for preci- ing IKA recommend stirrer tools (see section “Per- sion shaft. Stirring elements can be screw-connect- ®...
Commissioning Assemble the overhead stirrer and all necessary ac- Accessories must be assembled according to the cessories on a stable, even, non-slip surface. The following assembly instructions (Fig. 2 to Fig. 7). EUROSTAR overhead stirrer must be secured to a stable stand (e.g.
® ® - manufacturing number, see type plate - item and designation of the spare part see Dirt Cleaning agent www.ika.com, spare parts diagram and spare isopropyl alcohol parts list Construction material water containing tenside/ - software version. isopropyl alcohol...
- Contact the service department - Send the instrument for repair, including a short description of the fault. Warranty In accordance with IKA ® warranty conditions, the The warranty does not cover worn out parts, nor warranty period is 24 months. For claims under does it apply to faults resulting from improper use, the warranty please contact your local dealer.
• • • • • R 60 Keyless chuck • • • • Permitted IKA stirrer tools ® Only to be used in conjunction with R 6000 precision shaft max. speed (rpm) R 1342 Propeller stirrer ≤ 2000 •...
----------------------------------------- II ----------------------------------------- Contamination level ---------------------------------------- 2 ----------------------------------------- Protection at overload ------------------------ Yes/motor current limitation ----------------------- Fuse (on mains plate) ---------------------- T 4 A (IKA Ident. No. 2585100) -------------------- ® Ambient temperature °C ------------------------------------ +5 to +40 ----------------------------------- Ambient humidity (rel.)
Need help?
Do you have a question about the EUROSTAR 20 DIGITAL and is the answer not in the manual?
Questions and answers