Philips VL1100 Instructions For Use Manual page 7

AV SOURCE INPUT AV SOURCE INPUT
R–AUDIO–L R–AUDIO–L VIDEO VIDEO DC 9V DC 9V
CHANNEL CHANNEL
IR IR
1 2 3 4 1 2 3 4 ON/OFF ON/OFF
SCART OUTPUT SCART OUTPUT
DC 9V DC 9V
ON/OFF ON/OFF
TV OUTPUT TV OUTPUT
R–AUDIO–L VIDEO DC 9V
R–AUDIO–L VIDEO DC 9V
CHANNEL CHANNEL
1 2 3 4 1 2 3 4 ON/OFF ON/OFF
TPUT TPUT
VIDEO VIDEO DC 9V DC 9V
ON/OFF ON/OFF
Getting your Wireless TV Link ready
Setting up the transmitter unit
1 Position the transmitter unit on top of the video source with the front
panels aligned vertically.
Never put video sources or metal plates on the transmitter unit.
2 Connect the SCART connector of the SCART/RCA cable supplied to the
SCART output of the video source.
3 Connect the audio/video plugs at the other end of the cable to the
AV SOURCE INPUT connectors (5) on the transmitter unit.
Be sure to insert the yellow plug into the yellow video input and the
white and red audio plugs into the left (L) and right (R) audio inputs.
4 Connect the AC power adapter (8) to a mains socket and to the DC 9V
—<± supply socket (4) of the transmitter unit.
Setting up the receiver unit
1 Position the receiver unit close to the second TV.
The front of the receiver unit should be positioned so that remote
control commands can be received.
2 Connect the SCART connector of the SCART/RCA cable supplied to the
SCART input of the second TV.
3 Connect the audio/video plugs at the other end of the cable to the
TV OUTPUT connectors (13) on the receiver unit.
Be sure to insert the yellow plug into the yellow video input and the
white and red audio plugs into the left (L) and right (R) audio inputs.
4 Connect the AC power adapter (15) to a mains socket and to the
DC 9V —<± supply socket (12) of the transmitter unit.
ENGLISH
7