Advertisement
To remove a power supply, do the following steps:
1. Unplug the power cord from the electrical outlet.
2. Unplug the power cord from the back of the chassis. A spring-loaded
interlock at the AC receptacle
removed unless the power cord has been removed.
3. Remove the four screws
Grasp the handle
4.
4
CAUTION:
Never remove the cover on a power supply. Hazardous
voltage, current, and energy levels are present inside the
power supplies. There are no serviceable parts inside the
power supplies. If you suspect a problem with a power
supply, contact an IBM service technician.
prevents the power supply from being
and store them in a safe place.
on the power supply; then, slide it out of the chassis.
Removing Hot-Swap Power Supplies
Advertisement
