Features and Contents of PowerTank Lithium 1. Charge status indicator LED light panel 2. Power button Celestron telescope power cable (6.5’ long) 3. USB port charging indicator LED (green) 10. 100-240V AC charger 4. Ports for charging (16VDC – 2 A) USB devices 11.
75%, 2 lights is 50% and 1 light is 25%. snaps into place. 2. Pull the rubber cover from the charging port on the side of the PowerTank Lithium and plug in Charging USB Devices the charger’s cable. Lift up the rubber seal on the top surface of the PowerTank 3.
Red light will allow you to see in the dark while protecting your night vision. White light can be used when protecting You can also hang the PowerTank Lithium from any of the your night vision is not important. anchor points in either end cap via the clips on the hanging strap.
Celestron will repair or replace such product or part thereof the local authority in your municipality. which, upon inspection by Celestron, is found to be defective in materials or workmanship.
Page 7
The customer shall be responsible for all costs of transportation COVERED PRODUCT, IN ACCORDANCE WITH THE and insurance, both to and from the factory of Celestron, TERMS SET FORTH HEREIN. CELESTRON EXPRESSLY and shall be required to prepay such costs.
Celestron dealer in the U.S.A. or Canada. Warranty outside • Consult the dealer or an experienced radio/TV technician the U.S.A. and Canada is valid only to customers who for help.