Bluetooth® Technology; Connect A Mobile Device; Reconnect To A Mobile Device; Connect Using The Remote Control - Bose WAVE SOUNDTOUCH SERIES IV Owner's Manual

Connect a mobile device

Bluetooth wireless technology enables you to stream music from
Bluetooth smartphones, tablets, computers or other audio devices to
your SoundTouch® system.
Before you can stream music from a mobile device, you must
connect the device with system.
1. On the remote control, press and release
connect" appears on the display.
Tip: You can also press and hold
a device.
2. On your mobile device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in the Settings menu.
3. Select your Wave system from the device list.
Tip: Look for the name you entered for your Wave system in the
SoundTouch® app. If you didn't name your Wave system,
the default name appears.
Once connected, the system emits a tone.
until "Ready to
for one second to connect
B L U E T O O T H ® T E C H N O L O G Y

Reconnect to a mobile device

You can stream audio from a mobile device to the system. If there
are multiple paired devices within range, your system connects to
the most recent paired device that streamed to it. It may take a
minute or two for the paired device to connect. Your system's display
indicates connection status.

Connect using the remote control

1. On the remote control, press and release
searching message appears on the display.
The system connects to the most recent paired device within
range of your system. If that device is not within range, the
system goes through its list of paired devices until it finds an
available device.
2. On the device, play music.
Note: If a mobile device is connected to your system and you want
to connect to a different mobile device, see "Connect a
mobile device."
Connect using the Bluetooth feature on the
paired device
1. On the mobile device, turn on the Bluetooth feature.
2. Select your SoundTouch® system from the device list.
Your system powers on and emits a tone.
Clear the system's Bluetooth
pairing list
When you connect a mobile device to the system, the connection is
stored in the system's pairing list. You may need to clear the pairing
list if you cannot connect to a device. Once you clear the list, you
need to connect the device again.
On the remote control, press and hold
a pairing list cleared message appears on the display.
The system is ready to connect to a device.
Use the SoundTouch® app
You can also clear the pairing list using the app.
1. From within the app, select
and select your system.
2. Open the Bluetooth menu item and clear the pairing list.
, until a Bluetooth
(about 10 seconds) until
> SETTINGS > Speaker Settings
E N G L I S H - 1 1