Application Example Of System Confi Guration - Sony BVP-E30 Manual

2-2-4. Application Example of System Confi guration
n
For CCU/HDCU and RCP, set the numbers that correspond to the camera selection numbers of MSU. The same number
should not be duplicated among the multiple units of RCP, CCU/HDCU and MSU for secure connection. For the method of
setting the equipment numbers, refer to Section "3-2-2. Camera Network System Setting Menu", Section "3-3-5. RCP No.
Setting Menu" and Section "3-4-6. Equipment Setting" of this manual.
Camera head
1
Fiber cable
Triax cable
Camera No.1
Camera head
1
Fiber cable
Triax cable
Camera No.2
Camera head
Camera No.3
2-6 (E)
CCU/HDCU
MCS mode
CCU/HDCU-1
or
CCA-5 cable
CCU/HDCU
Legacy mode
or
CCA-5 cable
CCU/HDCU
MCS mode
CCU/HDCU-3
POWER CABLE
CAM ALARM
OPEN
MAIN
SHORT
Fiber cable
INCOM MIC ON
PROD
OFF PRIV
PGM ENG
or
HD CAMERA CONTROL UNIT
Triax cable
LAN cable
RCP
Legacy mode
RCP
MCS mode
RCP-2
LAN cable
HUB
LAN cable
(
The number of CCU/HDCU and the number of RCP need not to be matched.
If they match, use them by setting the RCP assignment.
MSU
LAN cable
MCS mode
MSU-1
Master
MSU
LAN cable
MCS mode
MSU-2
Client
RCP
MCS mode
RCP-3
LAN cable
( )
The power to the RCP should be
supplied via PoE HUB or to the
EXT I/O connector.
RCP
MCS mode
RCP-4
LAN cable
)
Camera Network System