Operating Basics; Auxiliary Features - Kenwood TK-2212-1 Instruction Manual

KENWOOD CORPORATION

OPERATING BASICS

•
Switching Power ON/OFF
Turn the Power switch/ Volume control clockwise to switch the transceiver ON.
Turn the Power switch/ Volume control counterclockwise to switch the transceiver OFF.
•
Adjusting the Volume
Rotate the Power switch/ Volume control to adjust the volume.
•
Selecting a Channel
Rotate the Channel selector to select a channel.
Clockwise increases the channel number and counterclockwise decreases it.
•
Making a Call
1 Select the desired channel.
2 Press and hold the PTT switch, then speak into the microphone in your normal voice.
• For best results, hold the microphone approximately 3 to 4 cm (1 1/2 inches) from your lips.
4 Release the PTT switch to receive.

AUXILIARY FEATURES

•
Time-out Timer (TOT)
The TOT is used to automatically inhibit transmission after a specified time elapse. If the PTT switch is held down for longer than
specified time, the transceiver will stop transmitting and a tone will sound. Release the PTT switch, then press it again to continue
transmitting.
ATINGBASICS
TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110
TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110
TK-3212-2 FCCID: ALH37693120