Exit Saving Changes; Exit Discarding Changes; Load Setup Default - Acer TRAVELMATE 8172 Service Manual

The table below describes the parameters in this screen.
Parameter

Exit Saving Changes

Exit Discarding
Changes

Load Setup Default

Discard Changes
Save Changes
Exit Saving Changes
Allows the user to save changes and reboot the system.
The following message is shown when user presses
System will reboot if Yes is selected and will stay in Setup if No is selected..

Exit Discarding Changes

Allows the user to not save changes before exiting Setup.
The following message is shown when user presses
System will reboot after either selection.
Load Setup Default
Allows the user to load default values in Setup. The following message is shown when user presses
on this item:.
It still stay in Setup after either selection.
Chapter 2
Exit System Setup and save your changes to CMOS.
Exit utility without saving setup data to CMOS.
Load default values for all SETUP item.
Load previous values from CMOS for all SETUP items.
Save Setup Data to CMOS.
"
Enter
Setup Confirmation
Save configuration changes and exit now
[ Yes]
"
Enter
Exit discarding changes?
[Yes]
Setup Confirmation
Load default configuration now?
[ Yes]
Description
"
on the item
[No]
"
on this item.
[No]
[No]
" "
Enter
37