JVC DR-MH300BE2 Service Manual page 8

3.2 DVD Drive unit section
3.2.1 Remove the top cover and tray (See figure 1, figure2, figure3, figure4)
(1) The part a on the reverse side of a DVD drive unit is made
to slide in the direction of an arrow. (A tray ejects a few.)
(2) Remove the four screws A attaching the top cover.
(3) Hooks b are removed, and the top cover is removed.
(4) The tray is drawn out forward.
(5) Remove the two screws B attaching the shaft guide, and
hook c is removed.
(6) It draws it out while lifting the tray in the direction of the ar-
row.
1-8 (No.YD089B)
Part a
Fig.1
A Top cover
Hook b
A
A
Fig.2
Hook c
B
Shaft guide
B
Fig.3
Fig.4
A
Hook b
Tray