Advertisement
5.6
Exchanging the fitting
There is no fitting in DVD drive units of the repair parts, make sure to attach a service fitting when the drive unit is exchanged. The
fitting that is removed from the old drive unit can be attached to the new drive unit.
The fitting can be removed by pulling upwards while opening out the lower part of the fitting outwards.
5.7
Initialization to the factory shipment state
Please refer to "DR-MH300BE, DR-MH300BEK,DR-MH300SE,DR-MH300SEF,DR-MH300SEK, DR-MH300SER,DR-ED400SE
(issue number : YD089)" about this section.
5.8
Setting after the drive unit replacement
Please refer to "DR-MH300BE, DR-MH300BEK,DR-MH300SE,DR-MH300SEF,DR-MH300SEK, DR-MH300SER,DR-ED400SE
(issue number : YD089)" about this section.
5.9
When it is displayed in FDP, 'RESETTING'
Please refer to "DR-MH300BE, DR-MH300BEK,DR-MH300SE,DR-MH300SEF,DR-MH300SEK, DR-MH300SER,DR-ED400SE
(issue number : YD089)" about this section.
Tray
Fitting
(No.YD089B)1-13
Advertisement
