Lexus HS250h Hybrid 2010 Emergency Response Manual page 23

Emergency Response (Continued)
Extrication (Continued)
Stabilize Vehicle
•
Crib at (4) points directly under the front and rear pillars.
Do not place cribbing under the high voltage power cables, exhaust
system, or fuel system.
NOTE:
The HS250h is equipped with a tire pressure warning system that by
design prevents pulling the metal valve stem with integral transmitter
from the wheel. Snapping the valve stem with pliers or removing the
valve cap and Schrader valve will release the air in the tire.
Access Patients
•
Glass Removal
Use normal glass removal procedures as required.
SRS Awareness
Responders need to be cautious when working in close proximity
to undeployed airbags and seat belt pretensioners. Front dual
stage airbags automatically ignite both stages within a fraction of
a second.
Door Removal/Displacement
Doors can be removed by conventional rescue tools such as hand,
electric, and hydraulic tools. In certain situations, it may be
easier to pry back the vehicle body to expose and unbolt the
hinges.
Cribbing Points
Cribbing Points
20
- -
Metal Valve Stem with Integral
Transmitter
Metal Valve Stem with Integral
Transmitter Installed on Wheel