Back View - Oregon Scientific RM818PA User Manual

BACK VIEW

RM818PA English R1
1. Battery compartment
• The unit uses 2 AAA / UM-4 1.5V batteries for power.
2. Adaptor slot
3. Reset hole
• Returns all settings to default values.
4. UP button
• Press and hold for 2 seconds to enable and start
the Atomic clock function when in normal mode.
• Press to increase the flashing item by 1 in Setting
mode.
5. DOWN button
• Press and hold for 2 seconds to disable the
clock function when in normal mode.
• Press to decrease the flashing item by 1 in Setting
mode.
6. PROJECTION ON button
• Press to activate projection and backlight for
5 seconds.
• Press to enable continuous projection with AC
adaptor connected.
4
4
atomic
9/1/04, 11:20 AM