Advertisement
Quick Links
Advertisement
Related Manuals for Danfoss TP75-RF
Summary of Contents for Danfoss TP75-RF
- Page 1 Selecting 0 effectively disables the OSC function. Event 1 time(0) Available Start-up Periods...
- Page 2 Switch No. 1- 5/2 DAY or 7 DAY. Fig. 2 TP75-RF or TS2 location TP75-RF Select the desired fixing position. (This should adhere to normal room thermostat practice, see Fig. 2). Position the slots in the top surface of the module over the lugs at the top of the wallplate, and hinge downwards until the module is pressed fully against the wallplate.
- Page 3 These models are supplied with a factory pre-set programme which will be active after a RESET has been performed. The pre- s Lower the front flap and remove the anti-discharge paper strip from programme is shown in the chart with the Setting Instructions. between the batteries and their contacts, and ensure the mains power The chart also has spaces for users own times and temperatures a s to the control circuit is switched on.