Gprs Setting - HoIP Telecom PET PEBBELL User Manual

STARTING PET PEBBELL

GPRS SETTING

In order to use the GPRS function, the user needs to setup the APN by sending SMS command.
APN stands for Access point name (APN) and is the name used to identify a general packet radio
service (GPRS) bearer service in the GSM mobile network. The APN defines the type of service that
is provided in the packet data connection.
Before getting started make sure that the SIM card in the tracker supports the GPRS function. The
APN can be acquired from your local GSM operators.
Send the command S1, APN, user name, password
Notes: Some access point name without user name and password, so please leave it blank.
Example: S1,internet
"internet" is the APN from the SIM card provider; therefore the user must set their particular APN
for their own country which the unit resides.
After sending the command, the device will reply "Set APN OK! GPRS connecting"
After send S1,APN, wait for a while then you will see device is online.
27