Setting Up The Port Replicator; Connect The Notebook To The Port Replicator - Fujitsu LIFEBOOK T732 Operating Manual

Working with the notebook

Setting up the port replicator

Select a suitable location for the port replicator before setting it up.
Follow the instructions below when doing so:
• Never place the port replicator on a soft surface (e.g. carpeting, upholstered furniture, bed).
This can block the air vents of the notebook and cause overheating and damage.
• Place the port replicator on a stable, flat and non-slip surface. Please note that the
port replicator's rubber feet may mark certain types of surface.
• Never place the port replicator and the mains adapter on a heat-sensitive surface.
• Do not expose the port replicator to extreme environmental conditions.
Protect the port replicator from dust, humidity and heat.

Connect the notebook to the port replicator

The Port Replicator supports various LIFEBOOK models. The adjusting
lever of the Port Replicator can be used to adapt the Port Replicator
to the size of the particular LIFEBOOK.
Before connecting the notebook to the port replicator, check if the setting
lever of the port replicator is in the right position. If necessary, adjust
the setting lever to the correct position.
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
64 Fujitsu