Advertisement
Mounting Instructions: 200W
Mounting Instructions:
1.) Place the unit against the intended mounting surface.
2.) Mark the areas where the mounting holes will be drilled. If the mounting surface is part
of the vehicle, make sure no vital components could be damaged by the drilling process.
6
F E NIE X .
2017
I NST RU CT ION MA N UA L
WE B. w w w.feni ex .co m
1.9685"
6.6563"
TM
V.5.1
3.) Drill four 4mm
mounting holes
on the mounting
surface, making
sure no vital
components of
the surface are
damaged.
4.) Make sure to
deburr the holes
thoroughly.
5.) Using customer
provided screws,
secure the
Storm Pro to the
mounting surface.
Advertisement
