Mounting Instructions - Feniex C-4014 Instruction Manual

Mounting Instructions: 100W

Mounting Instructions:

1.) Place the unit against the intended mounting surface.
2.) Mark the areas where the mounting holes will be drilled. If the mounting surface is part
of the vehicle, make sure no vital components could be damaged by the drilling process.
5
F E NIE X . 2017 I NST RU CT ION MA N UA L
WE B. w w w.feni ex .co m
1.9685"
4.0945"
3.) Drill four 4mm mounting holes on the
mounting surface, making sure no vital
components of the surface are damaged.
4.) Make sure to deburr the holes
thoroughly.
5.) Using customer provided screws,
secure the Storm Pro to the mounting
surface.
TM
V.5.1