Advertisement
Quick Links
MAJESTY BABY BASSINET
Assembly Instructions. Adult Assembly Required.
Read all instructions before use.
This manual is part of the product and
must be kept for future reference.
MODEL NUMBER:
30060 - White
VERSION CODE*:
1.0/1213/TG
* This number is needed if
replacement parts are requested
If you need product parts,
see below or Page 2!
FOR REPLACEMENT PARTS:
Go to our web site: http://www.badgerbasket.com/parts
Or scan QR code at right with your smartphone
1.0/1213/TG
Advertisement
Related Manuals for Badger Basket 30060
Summary of Contents for Badger Basket 30060
- Page 1 Assembly Instructions. Adult Assembly Required. Read all instructions before use. This manual is part of the product and must be kept for future reference. MODEL NUMBER: 30060 - White VERSION CODE*: 1.0/1213/TG * This number is needed if replacement parts are requested...
-
Page 2: Before You Begin Assembly
Iron on lowest setting for polyester/cotton. Secure all snaps/straps/tabs before washing. White Sheets (2/pack) are Badger Basket Model #30099 Badger Basket Company, PO Box 227, Edgar, WI 54426-0227 • Web: www.badgerbasket.com Toll-Free (Mon-Thurs 7:30 AM-3:30 PM CST): 1-800-236-1310 Phone: 715-352-2311 • Fax: 715-352-3163... - Page 3 ALWAYS use a or waterproof pad should be used under the baby. • Use ONLY the bedding designed for this bassinet from Badger Basket Company. Secure the bedding as instructed in this manual and check regularly to ensure it remains properly attached.
- Page 4 C×1 B×1 A×2 CANOPY HOOP UPPER CANOPY POLE F×1 D×1 E×1 LOWER CANOPY POLE BODY CANOPY I×1 H×1 G×1 VINYL/FOAM PAD BASKET FITTED SHEET K×1 L×1 J×1 BOTTOM BELT LINER/SKIRT...
- Page 5 Unfold the BODY (E) and attach both of the LEGS (A). The wheels rotate and can be locked in the cradle position (the bassinet will rock) or in the bassinet position (the bassinet is stationary) CORRECT INCORRECT INCORRECT Turn the BODY(E) right side up，Secure the BASKET (G) to the BODY (E).
- Page 6 Unfold the LINER/SKIRT (L), and position it on the frame. The LINER/SKIRT wraps and zips around the top rim of the BODY (E). Insert the BOTTOM (J) . Push the clips through the holes in the fabric and snap them securely to the BODY (E).
- Page 7 Put the FITTED SHEET (I) onto the VINYL/FOAM PAD (H) and insert into the BODY (E). Snap the LOWER CANOPY POLE (D) to the BODY (E). Snap the UPPER CANOPY POLE (C) to the lower pole. Attach the CANOPY HOOP (B) to the upper pole...
- Page 8 Attach the CANOPY (F) to the CANOPY HOOP (B). Thread the BELT (K) through the belt loops on the LINER/SKIRT (L) and tie in a bow on the front of the bassinet.