Brew Pause Feature; Cleaning And Maintenance; Decalcification - Cuisinart CPO-800C Instruction Booklet

BREW PAUSE
™
This feature interrupts the flow of coffee from
the basket to let you pour that first cup
mid-brew. Because the flavour profile of coffee
brewed at the start of a cycle differs from that
brewed toward the end, be aware that using
this feature will weaken the flavor strength of
the finished pot.
NOTE: Removing carafe for more than
20 seconds during brew cycle may cause
filter basket to overflow.
CLEANING AND
MAINTENANCE
Always turn coffee brewer off and remove
the plug from the electrical outlet before
cleaning.
Lift up the coffee brewer lid. Remove and
discard the paper filter and ground coffee. The
filter basket can be washed in warm, soapy
water and rinsed thoroughly, or cleaned on the
upper rack of the dishwasher. Dry all parts
after use.
Do not put any water in the unit once
the filter basket has been removed.
Wipe the area under the filter basket
with a damp cloth.
Remove the carafe from the heating plate.
Discard any remaining coffee. The carafe and
lid can be washed in warm, soapy water and
rinsed thoroughly, or placed in a dishwasher.
The carafe and carafe lid should be placed on
the upper rack only.
Do not use any scouring agents or harsh
cleansers on any part of the coffee brewer.
Never immerse base unit in water or other
liquids. To clean base, simply wipe with a
clean, damp cloth and dry before storing.
Fingerprints and other blemishes on the
housing can be washed off with soap and
water or a nonabrasive cleaning solution. Wait
for heating plate to cool, then wipe with a
clean, damp cloth. Never use rough, abrasive
materials or cleansers to clean the heating
plate. Do not dry the inside of the water
reservoir with a cloth, as lint may remain.
FEATURE
Maintenance
Any other servicing should be performed by an
authorized service representative.

Decalcification

Decalcification refers to the removal of calcium
deposits that form over time on the metal parts
of your coffee brewer. The mineral content of
the tap water in your area and the frequency of
use affects the rate of the calcium buildup,
which can affect the functioning of your coffee
brewer and the flavour of your coffee.
For best performance from your PurePrecision
Pour-Over Coffee Brewer, we recommend
cleaning it whenever CLEAN is flashing on
your control panel.
NOTE: Before decalcifying your unit, remove
the charcoal water filter from the water
reservoir.
To clean:
1. Fill the water reservoir to capacity with a
mixture of ⁄ white vinegar and
1
3
2. Press MENU button 5 times to get to
clean start. Press BREW/OFF to begin
cleaning cycle.
3. When the cycle is completed, 5 beeps will
sound and the coffee brewer will shut off.
4. If CLEAN flashes once more, repeat the
cleaning procedure with a fresh solution of
vinegar and water. NOTE: One cleaning
cycle is usually sufficient.
5. When CLEAN remains off, run one cycle
with a full reservoir of fresh, cold water to
rinse the unit.
6. Return the charcoal water filter to the holder
inside the water reservoir and your coffee
brewer is ready to brew!
10
™
⁄ water.
2
3