Related Manuals for Axesstel AXW-D1900
Summary of Contents for Axesstel AXW-D1900
-
Page 1: User Manual
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Axesstel 1xEV-DO Wireless Modem User Manual Rev: 0.01.01 Axesstel, Inc. Axesstel... -
Page 2: Table Of Contents
Contents _______________________________________________________ 5 Desktop Installation______________________________________________ 6 Wall Mount Installation ___________________________________________ 6 Getting to know the modem _______________________________________ 7 Connecting Axesstel EVDO Wireless Modem_________________________ 8 Configuring Your Wireless Modem _________________________________ 9 USB Driver Installation __________________________________________ 14 TCP/IP Settings ________________________________________________ 16 Troubleshooting________________________________________________ 18... -
Page 3: Introduction
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Introduction Axesstel's 1xEv-DO Broadband Wireless Modem allows users to "get connected" to high speed data services with unprecedented ease. Powered by QUALCOMM's MSM6500 processor, these modems provide high speed data service through USB and Ethernet interfaces at rates of up to 2.4Mbps download and 153.6 Kbps upload. -
Page 4: Safety Precaution
6. DO NOT use the power adapter if the power cord is damaged or the unit has been dropped or damaged in any way. 7. Only use the power adaptor provided by Axesstel. Do not use the AXESSTEL adapter for any other purpose. -
Page 5: Contents
If any piece is missing or broken, please call your agent or customer service. Items marked optional may be available only on select models. 1. Main Unit 4. User’s Manual 2. Antenna (2) 5. USB Cable (Optional) 3. AC/DC Adapter and AC Cord 6. Ethernet Cable (Optional) Axesstel... -
Page 6: Desktop Installation
3 Tighten the screws until the head is about 5mm from the wall. 4 Hang the modem on the screw using the two holes in the back. 5 Push the modem down until the unit is firmly locked into place. Axesstel... -
Page 7: Getting To Know The Modem
When it successfully acquires service signal, the signal LED turns to green, orange or red. Connection Type Switch Connection Type Switch is located between Ethernet port and USB port. Set this switch to Ethernet or USB depending on type of connection you are using. Axesstel... -
Page 8: Connecting Axesstel Evdo Wireless Modem
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Connecting Axesstel EVDO Wireless Modem Before you start 1. Make sure that your account is active. Please contact your ISP for account setup and activation information. 2. Configure your PC to obtain TCP/IP settings automatically from DHCP server feature of Wireless Modem. -
Page 9: Configuring Your Wireless Modem
• Open Web browser and enter IP address of Wireless Modem. Default IP address of Wireless Modem is 192.168.0.1 • When prompt for User name and password, enter admin/admin. • Click on appropriate tab to access System, Network, Security, or Status settings. Axesstel... - Page 10 Change Password: To change the password of your account, enter your old password and new password. System Upgrade: To download new firmware. Restore Default: Restore all settings to factory default settings. Reboot System: Restart Wireless Modem. Axesstel...
- Page 11 DHCP Server IP Range: Range of IPs that can be assigned by the DHCP Server to each PC. PPP Configuration: Enter User ID, Password, Authentication type, and dial number of your wireless data network account. APPLY: After making changes to Network settings, always click APPLY button to saves changes. Axesstel...
- Page 12 Enable specific ports to be opened for specific applications. MAC Filtering: Block specific MAC addresses. DMZ Server: Open a virtual server to public. Blocking WAN Ping: Deny Ping request from WAN IP. APPLY: Click APPLY to apply any of the Security setting changes. Axesstel...
- Page 13 1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Status Local Area Network: Current operation and connection status of LAN. Wide Area Network: Current operation and connection status of WAN. Axesstel...
-
Page 14: Usb Driver Installation
Follow the onscreen prompts to install the software driver from the CD. The software is located under “Drivers” folder named “USB_Driver”. When windows locates the device driver, click Next. PC will copy the necessary driver files from the CD. Axesstel... - Page 15 1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Click Finish after files are installed. Click Yes to re-start PC. USB Driver Installation is completed. Axesstel...
-
Page 16: Tcp/Ip Settings
Network Connection icon. Go to Local Area Connection Properties. Select the TCP/IP protocol line that has been associated with your network card. If there is no TCP/IP line listed, you will need to install TCP/IP first. Click the Properties of the TCP/IP component. Choose Obtain an IP address automatically. Axesstel... - Page 17 1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Choose Obtain DNS Server address automatically. Click Ok to exit Properties. If asked to re-start the PC, click YES. Axesstel...
-
Page 18: Troubleshooting
1. Click Start and Click Run. 2. Type cmd in the prompt and click OK. 3. In Command Prompt (C:\), type ipconfig/release and press Enter. 4. In Command Prompt (C:\), type ipconfig/renew and press Enter. 5. Exit the Command Prompt. Axesstel... -
Page 19: Specifications
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 SPECIFICATIONS TX: 824.64 ~ 848.37 MHz AXW-D800 Frequency RX: 869.64 ~ 893.37 MHz Range TX: 1850 ~ 1909.95 MHz AXW-D1900 RX: 1930 ~ 1909.95 MHz Channel Bandwidth CDMA 1.25 MHz USB Connector 1 Type B Ethernet Connector 1 RJ-45... -
Page 20: Safety Information
Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. -
Page 21: Sar Information
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless modem is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. -
Page 22: Safety Information For Rf Exposure
SAFETY INFORMATION FOR RF EXPOSURE Body worn operation This device was tested for typical body-worn operations with the back of the phone kept 15 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 15 mm. separation distance between the user’s body and the back of the phone, including the antenna. -
Page 23: Radio Frequency Interference Statement
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause...
Need help?
Do you have a question about the AXW-D1900 and is the answer not in the manual?
Questions and answers