Audi TT Roadster Service Training page 50

Infotainment
Aerial system for radio navigation systems (without TV tuner)
The BNS 5.0 and RNS-E radio navigation systems
have FM tuners with switched diversity.
In these radios, aerial switching takes place in an
external aerial amplifier with aerial selection.
The radio has an aerial input (HF signal) and a signal
output (IF signal).
The IF signal is evaluated by an aerial amplifier.
If the signal is too weak, this aerial amplifier
switches to the other aerial.
Legend:
J393 Convenience system central control unit
J503 Control unit with display for radio and
navigation
R24 Aerial amplifier
R50 Navigation aerial
50
In vehicles equipped with a radio navigation system
without TV tuner, the serial selection function is
integrated in aerial amplifier -2- R111.
Aerial amplifier -2- R111 receives signals from both
radio aerials and can switch between both aerials
when FM reception is desired. When AM reception
is desired, aerial amplifier -2- R111 is always
switched to the stub aerial.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
R65 Telephone aerial
R86 Aerial amplifier, mobile telephone
R93 Radio aerial 2
R111 Aerial amplifier -2-
R126 Telephone bracket
391_077