Panasonic BT-M2090Y Service Manual page 9

(0
SET-UP FOR MONITOR INSTALLATION
When installing the monitor, make set-up adjustments required for the picture set-
tings to match conditions where the monitor is to be used.
To call up SET-UP MENU and select a function: --
1.
To make [I] (SET-UP MENU) appear, with the ENTER button pressed, press
the MENU button.
2.
Press the & or Y button to select an adjustment ~em.
(To set STATUS DISPLAY or CONTROL LOCK, steps
3
and
4
are not
necessary.)
3.
Press the ENTER button to call up the adjustment menu I]] of a selected
item (e.g. WHITE BALANCE).
4.
Press the "' or Y button to select a function to be adjusted.
5.
Press the <Ill
or ~ button to change the setting.
6.
With the display [I] on screen, press the A or Y button to select another
function and repeat step
5.
7.
Press the MENU button to complete. SET-UP MENU disappears.
e
To make [I] (SET-UP MENU) disappear:
Press the MENU button.
e
To make I]] (e.g. WHITE BALANCE) disappear:
Press the MENU button twice.
SIZE/CENTERING (size/positioning adjustments of RGB signal pictures)-
For analogue RGB video signal pictures, horizontal size, vertical size,
horizontal positioning and vertical positioning can be finely adjusted.
Adjustment (level) Function
H.
POSITION (-10, -9 ... 0 ... +9, +10)
+ moves the picture to right
- moves the picture to left.
V. POSITION (-10, ·9 ... 0 ... +9, +10)
+ moves the picture down.
- moves the picture up.
H.
SIZE (-10, -9 ..• 0 ... +9, +10)
+
makes
the picture
wider.
- makes the picture narrower.
V. SIZE (-10, -9 ... 0 ... +9, +10)
+ makes the picture higher.
- makes the picture lower.
<
SET-UP MENU>
SIZE/CENTERING
... WHITE BALANCE ADJUST
REMOTE SELECT
STATUS DISPLAY:ON
CONTROL LOCK : OFF
lilll!!l!l
:111
[I]
<WHITE BALANCE>
... RED DRIVE : 0
GREEN DRIVE : 0
BLUE DRIVE : 0
RED CUTOFF : 0
GREEN CUTOFF : 0
BLUE CUTOFF : 0
lillml
:111
I]]
r3
• Each Ume the MENU button is
pressed, the previous menu is
restored.
r3
e
SIZE/CENTERING appears and the
function is operable only when
monitoring the picture of analogue
RGB video signals.
SET-UP FOR MONITOR INSTALLATION (continued)
WHITE BALANCE ADJUST (white balance adjustments)-
eetore making these adjustments, select the colour temperature
930OK or &SOOK on MENU.
Adjustment (level) Function
RED DRIVE (-10,
-9, ...
0 ••• +9, +10)
Adjusts the drive level of a red signal
component.
GREEN DRIVE (-10, -9, ••. 0 ••. +9, +10)
Adjusts the drive level of a green
signal component.
BLUE DRIVE (-10, -9, ... 0 ... +9, +10)
Adjusts the drive level of
a
blue signal
component.
RED CUTOFF (-10, -9, ... 0 ••• +9, +10)
Sets the cut-off voltage
of
a
red
signal
component.
GREEN CUTOFF (·10, -9, ... 0 ... +9, +10)
Sets the cut-off voltage
of a
green
signal component.
BLUE CUTOFF (-10, -9, ... 0 .•. +9, +10)
Sets the cut-off voltage of a blue
signal component.
REMOTE SELECT (TALLY/REMOTE-terminal settings)-
Via the TALLY/REMOTE terminal, the tally lamp can be turned on/off,
or a function (selected from display
111
shown on the right) can be
operated using an external control.
INPUT setting indications and selected inputs
r3
• By making white balance
adjust-
ments on SET-UP MENU, *appears
to the right of the COLOR TEMP.
setting on MENU
<REMOTE SELECT>
... INPUT :A«B
CNTL-1 :UNDER SCAN
CNTL-2 :ASPECT RATIO
liJliiiii)
:EB
111
~indicates when deactivating the remote control via the TAl,._l,. YJREMOTE terminal
.=:&,
INOTUSEI M•B A>W/C IA .. RGBI AHCOMPOI BHY/C I B .. RGB IBHCOMPOI Y/CHRGBIY/C .. COMPOI RGB .. COMPO
=
I • I
A
A A A B B B VIC Y/C RGB
=
Y/C
RGB
COMPO. Y/C
RGB
COMPO.
RGB COMPO. COMPO.
CNTL-1/CNTL-2 setting indications and set positions
*=
indicates when deactivating the remote control via the TALLY/REMOTE
terminal
ln~fJli08n
I
NOT USE
I
UNDER_ SCAN
I
PULS':_~ROSS
I
COL~R-OFF
I
BLUE -~HECK
I
EXTE~NAL SYNC
I
ASPECT ~ATIO
I
COLOR TEMP.
I
AUDIO MlJfE
Short-c1rcu1t ON ON ON ON External 16-9
6500
ON
O_e_en-clrcuit OFF OFF OFF OFF
lntemal
eTALLY/REMOTE terminal functions
All controls via TALLY/REMOTE terminal are made by short-circuiting or open-
circuiting any pin from Pin 1 to 4 and either Pin 7 or 8 (GND each) of this terminal.
When using this terminal, be sure to short-circuit Pin 5 and either Pin 7 or 8.
CNTI..•1
~-<:l,,;Ult \\ ,- -
Tooi-n-cliwll
0
~·'cc-c.,cc_.,,,---~
,,
T.M.LY
4-3 9300 OFF
r3
e
When the TALLY/REMOTE terminal
is used, the following functlons
become deactivated (except when
they are set to "NOT USE"):
- Front INPUT SELECT and EXTSYNC
switches.
- Front UNDER SCAN, PULSE CROSS,
COLOR OFF and BLUE CHECK
swllches.
• On--screen MENU's ASPECT RATIO and
COLOR TEMP. functions.
• If a 11.mction is applied to both CNTL·
1 and CNTL-2. CNTL-1 has priority.
•1: Pin 6 Is DC power
output
pin. It
outputs DC 5 V
when the
monHo(s
power ls on. (Do not short--circuit pin
6
dire.Uy to ground.)
a
I
i
I\:
~
-c