Using The Mp3 Link Connection (Line In); Connecting To The Mains Supply - Seiki SB060D Instruction Manual

Using the MP3 LINK Connection (Line In)

Use the 3.5mm to 3.5mm audio cable to connect the audio device's headphone
socket to the unit's MP3 LINK socket. Then press the LINE button on the remote
control or press the source button on the unit to choose the LINE function.
POWER/
SOURCE
VOL+
VOL-
LINE IN
Side view of the unit

Connecting to the Mains Supply

• Ensure that the power supply voltage is in the voltage of 100V~240V.
• This unit is designed to use adapter.
• Connecting the unit to any other power source may cause damage to the unit.
Unwind the mains cable to its full length. Connect the mains plug to a mains
socket. Make sure the mains plug is fully inserted into the mains socket.
• The mains plug/appliance coupler is used as the disconnect device, the
disconnect device must remain readily operable.
• Connect the Adapter to the unit and AC Socket.
• Ensure all audio connections of the unit are connected before connecting to the
mains power socket.
• Unplug the power cord from the outlet when the unit is use for an extended
period of time.
3.5mm to 3.5mm
audio cable
OPTICAL IN
L
AUX IN
R
COAXIAL IN
- 8 -
Audio device
20V DC