Using the OPTICAL Connection
Use an optical cable to connect the TV's optical output socket to the unit's
OPTICAL socket. Before inserting the optical cable, remove the OPTICAL socket
cover. Then press the OPT button on the remote control or press the source
button on the unit to choose the OPTICAL function.
OPTICAL IN
L
AUX IN
R
20V DC
COAXIAL IN
OPTICAL cable
Important tips for optical audio:
Use the correct toslink cable and make sure that it is firmly seated in both source
and sound bar sockets.
Optical output is activated on the source (they should see a red light emitting from
the toslink socket).
It may be labeled SPDIF in the setting menu of the source.
The optical output is set to output PCM and not Dolby Digital.
Using the COAXIAL Connection
Use a COAXIAL cable to connect the TV's coaxial output socket to the unit's
COAXIAL socket. Then press the COAXIAL button on the remote control or press
the source button on the unit to choose the COAXIAL function.
OPTICAL IN
L
AUX IN
R
20V DC
COAXIAL IN
COAXIAL cable
Rear view of the unit
Rear view of the unit
- 7 -