Sony KDL-40CX525 Service Manual page 61

3. Press JUMP or OPTIONS on the Remote Commander until
the VPC menu displays.
VPC
000
000
4. Press 2 to move to "006 WB" Category.
VPC
006
000
5. To change the data value of the R_DRV, press 3 to increase
the value or 6 to decrease the value.
NOTE: The data value must be set between the range 1 to
255.
6. Press 1 to move to the next item (001 G_DRV).
7. To change the data value, press 3 to increase the value or
6 to decrease the value.
8. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
9. To save the changes, press MUTING
10. To exit service mode, press HOME or turn the TV power off.
KDL-32CX525/40CX525/46CX525
SECTION 7 - SERVICE ADJUSTMENTS
SERVICE
DATA_COPY
BU_TRANS 0
SERVICE
WB
R_DRV 128
then press 0 .
RESETANDO TV PARA CONDIÇÃO DE
FÁBRICA
Use the following instructions to restore the User Adjustments and
Channel Memory settings to the preset factory conditions.
1. While holding down the
press the POWER button on the TV Switch Unit of the set.
2. The set restarts and displays the Initial Setup screen. This
may take several minutes.
on the Remote Commander,
56