Forgot Pin Code - Profoon PDX-8420 User Manual

Other:
• The display stays blank:
− The batteries are empty. Place the handset on the base station
or on the charger to charge the batteries, and let the handset
charge during at least 15 hours uninterrupted.
• The handset does not switch on:
− The battery voltage is too low; place the handset on the base
station or the charger and charge the batteries for 15 hours.
− The batteries have not been inserted; check this.
• The batteries get low too fast:
− Check the charging contacts of the base station or the charger
and of the handset, and clean them if necessary.
− The batteries shall be replaced; replace them.
• The handset does not have contact with the base station:
− You are too far from the base station; reduce the distance.
− The base station has been switched off (adapter from the mains
socket); correct this.
− The handset is not registered with the base station (anymore);
register it (again).
In case the failure has not been solved with aforementioned
solutions:
• Remove the batteries from the handset, and unplug the power
supply adapter and the phone connector from their sockets;
connect everything again after several minutes.
• You can also contact the Profoon service center on phone number
+31 (0) 73 6411 355 or 03 238 5666 (Belgium) of with the supplier
of this phone.
13

FORGOT PIN CODE

If you have lost or forgotten the new PIN code, you can restore the
factory code 0000 as follows.
Keep in mind that this action deletes ALL phonebook memories,
last dialled number memories and Caller-ID memrories.
1. Press the key
2. Now press the buttons
The text 'PLEASE WAIT' will appear in the display, followed by 'OK'.
The PIN code is now 0000 again.
- # - # - * - * - 7 - 9 - 3 one after the other
-25-