Pairing Your Headset And Phone - Qingdao GoerTek Electronics Goer GBH 100 Handbook

3.6 Turning on or off Bluetooth Headset
1. Turn headset ON: Press multi-function button
for 5 seconds until blue light blinks 5 times and
headset beeps twice, then release
multifunction button. The power is on.
2. Turn headset OFF: Press the multi-function
button for 3 seconds until red light blinks
quickly and headset beeps twice, then release the
key. The power is off.

3.7 Pairing Your Headset and Phone

Before using the headset, make sure that the headset
is paired to your phone or other Bluetooth devices.
1. Ensure the headset power is off before pairing.
2. Press the multi-function button until red and blue
lights blink alternately; this process takes about 7
seconds, then release. The headset starts pairing.
The blue light blinks first and please don't
release the button until red and blue lights blink
alternately. The headset beeps two times during
the paring if you wore the headset.
3. Set your Bluetooth phone to discover the headset
by the phone's instruction guide. It will take
several seconds to pair headset to your phone.
4. Your phone will display blue-tooth's name after
pairing. Choose "GBH 100" and confirm.
5. PIN=0000 is required to be entered; pairing is
started after PIN confirmation.
6. Blue light is on instead of red and blue lights
blinking alternately until pairing is done.
Note 1: Your phone cannot find the headset when
your headset is not in the function of pairing.
7