Battery Charge - Qingdao GoerTek Electronics Goer GBH 100 Handbook

3.5 Battery Charge

To charge the battery:
1. Plug the charging adapter into the headset's
charging cradle.
2. Plug the charging adapter into an AC outlet. The red
indicator light is on when connected.
3. Insert Goer GBH 100 Bluetooth headset into the
charging cradle as shown in the below figures：
1) Open up the lid of charging cradle;
2) Insert headset to charging cradle;
3) Press down the lid of charging cradle slightly.
4. The red indicator light flashes twice a second
during charging.
5. Headset is fully charged when red indicator light
stops flash to continuous light.
6. Unplug the charging adapter from outlet.
7. Remove the Bluetooth headset from charging
cradle.
Note 1: The headset will be fully charged more
than 2.5 hours before you use the headset for the
first time.
Note 2: The red indicator light on headset will
flash once every three seconds and make a
caution alert when the battery is running out of
power.
① ② ③
6