Qingdao GoerTek Electronics Goer GBH 100 Handbook page 5

1. Goer GBH 100 Bluetooth Headset accords with
Bluetooth Ver. 1.1 and supports Bluetooth Headset
Profile and Bluetooth Hand-free Profile）.
2. Goer GBH 100 headset must be fully charged (at
least 2.5 hours) before you use it for the first time.
3. Pairing Goer GBH100 headset signal with your
Bluetooth phone or other Bluetooth devices as 3.7
before use the headset.
4. Make sure the distance between headset and phone
or other Bluetooth devices is less than 10m.
Distance should be shortened if there is any barrier
in between.
3.3 Adjust the Headset to Your Ear
The weight of GBH100 is just 10g. Wearing
positions could be adjusted referring to the following
figures.
3.4 Adjust Earhook Angle
Adjust earhook angle as shown in the figure below:
Note: Intensive care should be taken during this
Using the Headset
process in order not to break it.
5